Soldering Iron Manufacturer,Supplier and Exporter in Uk
Product Code : DS-LE-10808
Quick Answer: The Soldering Iron is a 60W iron with a Nichrome heater and a Ceramic bit, 230mm long. It is provided with a stand and standard accessories.
Last updated: October 2026
Key Features
Power rating 60W
Nichrome heater
Ceramic bit
Length 230mm
Stand 74mm wide, 109mm deep and 129mm high, weighing 350g
Technical Specifications
Specification
Value
Power rating
60W
Heater
Nichrome
Bit
Ceramic
Length
230mm
Stand size
74mm wide x 109mm deep x 129mm high
Stand weight
350g
About This Product
The Soldering Iron is used to make soldered joints. Once the iron is hot enough, the solder wire is held close to the joint so the solder melts and flows freely. The wire is removed when there is enough solder, then the iron is taken away at 45° and switched off.
Frequently Asked Questions
Q1. How is the Soldering Iron used? When the iron is hot enough, hold the solder wire close to the joint so the solder melts and flows freely. Remove the wire once there is enough solder, then take the iron away at 45° and switch off the power.
Q2. What is supplied with the Soldering Iron? It is provided with a stand and standard accessories.
